image

Superior technology.
Better products.
More value.

BE9110 SD H.264 or AVS Low Bitrate Encoder

The Telairity BE9110 is a scalable, fully programmable, broadcast quality encoder for standard definition video formats. It combines Telairity's uniquely powerful hardware and software technology with leading-edge video compression (either H.264/AVC or AVS) to achieve industry-leading video quality at very low bitrates, down to 500Kbps. Featuring “instant on” for immediate availability and simple front panel control for quick and sure field operation, the premium ultra-low bit rate BE9110 encoding platform addresses the critical need for high video quality at the lowest feasible bit rates in IPTV and other applications. Like all Telairity encoders, it can be easily upgraded via software to add new or improved features and enhance performance.

Video Encoding Features

  • H.264/AVC - Main, Level 3 and Baseline profiles; or AVS-P2
    • Input Video Formats: 576i (PAL), 480i (NTSC) Output Horizontal Resolutions: 720, 640, 544, 480, 352, 240/288 (CIF) Rate Control
    • Constant Bit Rate (CBR), Variable Bit Rate (VBR)
      • Bitrate: 0.1–5.0Mbps
    Scene change detection Entropy Coding: CABAC or CAVLC per AVC or AVS profiles Spatial Preprocessing Deblocking (Loop) Filter

Audio Encoding Features

  • SD-SDI embedded audio input – per SMPTE 272M
    • Four programs (stereo pairs)
    • Stereo, Dual Mono, Mono
  • MPEG-1 Layer 2 encoding, bit rates: 32 to 384 Kbps
    • MPEG-4 (H.264/AVC) AAC – LC option for better quality at lower bit rates
    • 2 AES audio and 2 analog stereo pairs (cables optional)
  • Dolby Digital (AC-3) pass-through

Control Features

  • On board Flash memory for fast program upload at boot
  • Web browser control via Ethernet interface
  • Rapid-reset Front Panel with “two-button” selection of 4 programmable profiles

Output

  • 2 MPEG-2 transport stream outputs over DVB - ASI
  • 2 IP Transport stream outputs with TOS over 10/100 Base-T Ethernet

Video Input

Input Format:
SD-SDI (SMPTE 259M) input
Analog with external SDI converter option
Video Input Formats:
4:2:2 for PAL and NTSC
Frame Rates:
30, 29.97, 25, 24, 23.98 frames per second
Digital Video In:
I BNC Connector (SDI) for 75 ohm cable
SDI Loop Out:
I BNC Connector

Audio Input

Input Format:
Embedded in SD-SDI per SMPTE 272M
Dolby Digital (AC-3) pass-through
External Audio: 2 AES and 2 Analog stereo pairs

Compressed A/V Output

Output Interfaces:
2 Digital Video Broadcast – Asynchronous Serial Interfaces (DVB-ASI), 270Mbps, buffered non-inverting
2 10/100 Base-T Ethernet
Packet Format:
MPEG-2 188 byte Transport Stream (TS) packets in either TS/UDP/IP or TS/RTP/UDP/IP format with optional FEC
Compressions Format:
H.264 Main, Level 3 & Baseline profiles; or AVS-P2
Compressed Bitrates:
User programmable: 0.1 to 5 Mbps, CBR or VBR
ASI Stream Out:
2 BNC connectors
IP Stream Out:
2 RJ-45 connectors

Control

Control Application:
Web browser Interface over Ethernet
Direct Presets:
User-programmable front panel control
Alarms:
4 contact closures to detect failure of power supply or fan, over-temperature, 1 software-detectable condition
SNMP:
Reporting Agent (option)

Power Specifications

Input Voltage:
100 to 240 VAC (Auto sensing)
Line Frequency
47 to 63 Hz
Power consumption:
135W

Mechanical Specifications

Dimensions & Weight:
1RU (H) x 19” (W) x 18” (D) rack mountable, 15 lbs.

Environmental Specifications

Cooling:
Forced air-cooling front to back
Operating Temperature:
-10° to 55°C
image
BE7110

Applications

The Telairity BE9110 SD encoder platform offers state of the art AVC or AVS video compression for standard definition television formats in a compact and cost effective 1 RU form factor. It excels at ultra-low bit rates, from 2Mbps to 500Kbps, and is targeted to IPTV, ITV, mobile and other applications where the lowest possible bit rates are desired.

Benefits

Compact 1RU system for broadcast- quality SD video encoding

Based on the fully programmable Telairity-1 video architecture; full software upgradeability for easy maintenance and improvements, including conversion between AVC and AVS codecs

MPEG-4 AAC-LC option for high audio quality at very low compressed bit rates; Dolby Digital (AC-3) pass- through also supported

“Instant on” two-second startup

Highly reliable Telairity technology backed by Telairity's unconditional one year service guarantee

Options

Breakout cables for external audio inputs (digital and analog); SDI converter for analog video inputs

Dual Redundant Power Supplies

Other Models

BE8500 Upgradeable to BE8500 with dual mode HD/SD auto-switch capability (requires return to factory)

Ordering Information

Part Number: BE9110

Contents

  • BE9000-series Encoding Platform
  • Power Cable: IEC to USA plug; optional Euro plug
  • USB flash drive with backup copy of encoder firmware and manual

Requirements

  • Web browser control system
  • SDI input source video
    • SD SMPTE 259M
  • Input cable
    • 75 Ohm coaxial with BNC connector
  • Output cables (either or both)
    • 75 Ohm coaxial with BNC connector
    • Cat5/6 Ethernet with RJ-45 connector

Documentation