BE-IRD-5501 Integrated Receiver/Decoder
The BE-IRD-5501 is a versatile broadcast-class H.264/AVC (MPEG-4) HD/SD integrated receiver and decoder for broadcasters, cable operators, and telecoms. A highly flexible professional choice, the 5501's ability to decode all video formats (HD or SD, MPEG-2 or MPEG-4 (H.264/AVC)), together with its wide choice of input options, makes it the perfect solution for customers migrating from MPEG-2 SD to MPEG-4 (H.264/AVC) HD. A built-in Multiplexer/Filter allows users to create highly customized output transport streams. Two PCMCIA Common Interface card slots support a variety of Conditional Access systems, including Conax, Cryptoworks, Irdeto, NDS, Mediaguard, SECA, Viacross, and others. LAN control and monitoring can done using the unit's built-in Monitor Center facility, or through standard SNMP-based network management systems.Input Specifications
QPSK / 8PSK Demodulation
(complies with DVB-S, MPEG-2, ETSI 300421 standards)
- Input frequency range:
- 950~2150MHz
- Input Level:
- -25dBm~65dBm
- Input Impedence:
- 75Ω, F type female connector
- Symbol Rate:
- 2~45Mb/s (SCPC or MCPC)
- Rolling Off Factor:
- 0.35 for QPSK; 0.35, 0.25, 0.2 for DVB-S2
- Punctured Rates:
- 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9, 8/10 for DVB-S QPSK 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 for DVB-S2 8PSK
- LNB Level:
- 0, 13V, 18V adjustable
- Reed Solomon Error Correction:
- 204, 188, T = 8 & I = 12
DVB-C QAM Demodulation
Tuner- Input Symbol Rate Range:
- 1~7Mbps (PAL), 1~6Mbps (NTSC)
- Demodulation:
- 16/32/64/128/256QAM
- Bandwidth:
- 6, 7, 8MHz
- Frequency Range:
- 48~860MHz
- Digital Signal Input Level:
- -15~15dBmV
- Input Impedance:
- 75Ω, IEC Female (7/8MHz) or F Female (6MHz) Input
DVB-T COFDM Demodulation
(complies with DVB-T & MPEG-2 standards)
Tuner- Input Symbol Rate Range:
- 4.98~31.67Mbps (8MHz bandwidth)
- Demodulation:
- QPSK, 16 QAM, 64 QAM
- Bandwidth:
- 6, 7, 8MHz
- FFT Mode:
- 2K/8K
- Guard Interval:
- 1/4, 1/8, 1/16, 1/32, off
- FEC Code Rate:
- 1/2, 2/3, 3/4, 5/6, 7/8
DS3 Input & Loop-through Output
(compatible with Barco, Huawei, etc. protocols)
TS over IP Output
- 10/100base-T:
- RJ45
- Maximum Output Code Rate:
- 70Mbps
- UDP/RTP:
- Multicast or Unicast
- Multicast Control Protocol:
- IGMPV2
Input Connectors
- 1 IP input – RJ45 connector (shared with output)
- 1Ethernet management port – RJ45 connector
- 2 ASI – BNC connectors
- 1 RF Tuner
Output Connectors
- 1 IP output – RJ45 connector (shared with input)
- 1 RS-232 printing port
- 4 ASI -- BNC connectors
- 2 SDI – BNC connectors
- 1 HDMI
- 1 component video – Y Pb Pr set of RCA connectors
- 2 composite video – 1 RCA connector, 1 BNC connector
- 2 L/R stereo pairs – RCA connectors
- 2 DB-9 connectors for 2 AES/EBU and 2 analog XLR audio stereo pairs
- 1 RF Tuner loop-out
Physical Specifications
- Input voltage:
- AC 90V~260V, 50/60Hz
- Dimensions & Weight:
- 1RU(H) /19(W)x10(L)in / 483(W)x255(L)mm 11lbs/5Kg
- Operating Conditions:
- Temperature 0~45°C; Humidity < 95%
- Storage Temperature:
- 20~70°C
BE-IRD-5501
Features
- Compact 1RU system for broadcast quality video decoding
- Part of the Telairity family of professional video compression products for trouble-free integration with Telairity encoders.
- Decodes all 4:2:0 video formats: HD & SD, MPEG-2 & H.264/AVC
- HD to SD down-conversion; Convert DVB to/from IP; Convert other TS formats to DS3
- QPSK, QAM, and COFDM input interfaces with error correction
- DVB-S, -S2, -T, -C RF input with loop-out; DS3 input over 75ohm cable with loop-out; IP input
- 2 CI slots to accommodate a variety of CA systems; Supports BISS 1, BISS E descrambling
- IP, ASI, SDI, HDMI, Component, and Composite video outputs
- Decodes 2 audio stereo pairs with embedded, analog and digital output; AC3 pass-through supported
- Built-in multiplexer/filter for highly customized output transport streams
- Teletext, VBI, EBU and DVB subtitles; WSS and Closed Caption
- Auto-saves settings on power loss